Ferric and Non-Ferric Alum Supplier — Vadodara
Buy bulk non ferric alum powder for wastewater treatment and potable water. Technical-grade ferric/non-ferric options. COA + MSDS. Request a wholesale quote.
Quote in 4 business hours · Exports to UAE, Bangladesh, Egypt & Africa
Quick Facts
Ferric / Non-Ferric Alum quote depends on Fe grade and MT quantity — share specs for a documented offer.
WhatsApp or email quote with COA within 4 business hours

Product Overview
Ferric alum and non-ferric alum from Drashti Chemicals address the two distinct coagulation needs in Gujarat — industrial ETP cost control with ferric alum, and potable or process-water colour safety with non-ferric. Both are aluminium sulphate-based coagulants; the difference is iron content: ferric alum carries 0.5–2% Fe for enhanced colour removal at lower dose; non-ferric keeps Fe below 0.01% so chlorinated product water stays colourless.
Procurement mistake we see repeatedly: ordering ferric alum for a RO pretreatment line because it is cheaper, then failing colour tests after chlorination. Non-ferric alum costs marginally more but eliminates the tea-colour complaint. For textile ETP primary treatment where water is not reused, ferric alum saves 10–15% on coagulant spend. Drashti COA specifies iron as Fe on every batch — attach it to your incoming QC checklist.
Dosing mirrors standard alum: 8–10% saturator solution, dose 30–200 mg/L as product. Ferric alum may allow 10–20% lower dose than non-ferric on same effluent due to dual coagulation mechanism (Al + Fe). Monitor sludge colour — ferric alum sludge is darker and may affect brick-manufacturing or cement-kiln co-processing acceptance. pH correction with lime or soda ash required when raw alkalinity is below 50 mg/L.
Packaging: 50 kg HDPE bags, clearly marked FERRIC or NON-FERRIC. MOQ one bag per grade for side-by-side jar test; bulk quote on request for municipal and industrial annual contracts. Dispatch from Vadodara. MSDS and COA supplied. GST 24AGLPC6288M1ZX. Store dry, separate grades in different bays to prevent mix-up.
Ferric alum vs. ferric chloride: ferric alum adds less chloride to effluent TDS and is less corrosive to dose; ferric chloride acts faster on phosphate. Non-ferric alum vs. PAC: PAC wins on sludge volume and dose efficiency; non-ferric alum wins on per-kg cost for large municipal plants with adequate sludge handling. Drashti recommends jar testing both grades on your sample before annual tender finalisation.
Key Specifications
| CAS Number | 10043-01-3 |
|---|---|
| Chemical Formula | Al₂(SO₄)₃ |
| Molecular Weight | 342.15 g/mol |
| Appearance | Ferric: yellowish crystals; Non-ferric: white crystalline solid |
| Purity / Assay | 98% min; Al₂O₃ typically 16–18% |
| pH | 2.8–3.5 (aqueous) |
| Density / Specific Gravity | 2.71 g/cm³ |
| Solubility | Soluble in water |
| HS Code | 28332220 |
| Available Grades | Ferric alum (industrial); Non-ferric alum (potable / paper / pharma) |
| Packaging Options | 25 kg HDPE bags; 50 kg HDPE bags |
| Chemical Name | Aluminium Sulphate |
| Minimum Order | 50 Kilograms |
| Shelf Life | As per COA / manufacturer guidelines |
Complementary Products in This Line
Related water treatment chemicals often ordered together for plant programs.
Expert supply · Est. 2015
Mr Rajesh Chauhan
Founder-led industrial chemical supply from Vadodara — ETP coagulant selection, RO programs, textile and pharma utility chemicals. Batch COA/MSDS on every dispatch. GSTIN 24AGLPC6288M1ZX.
Applications
Why Buy FERRIC ALUM / NON FERRIC ALUM from Drashti Chemicals?
- Batch COA & MSDS with every lot — no exceptions
- Consistent quality verified against each shipment
- Pan-India delivery: Gujarat, Maharashtra, Rajasthan & beyond
- Export supply to UAE, Bangladesh, Egypt, Kenya, Malaysia (FOB Mundra)
- GST-compliant invoicing + export documentation (commercial invoice, packing list)
- WhatsApp quote within 4 business hours from Vadodara warehouse
Export Availability
Drashti Chemicals supplies FERRIC ALUM / NON FERRIC ALUM for international export from Gujarat. We handle container-load and LCL shipments (HS code 28332220) via FOB Mundra / Nhava Sheva. Minimum export order from 2 MT. Documentation includes commercial invoice, packing list, COA and MSDS per lot. Active export markets include UAE, Bangladesh, Egypt, Kenya, South Africa and South-East Asia.
To get an export quote, share your destination country, quantity and required grade via WhatsApp or the RFQ form above.
Frequently Asked Questions
Where can I buy bulk non ferric alum powder for wastewater treatment?
Drashti Chemicals supplies non-ferric and ferric alum grades from Vadodara for ETP and potable water. Batch COA + MSDS. WhatsApp quantity for a wholesale quote.
How do I buy FERRIC ALUM / NON FERRIC ALUM in bulk from Gujarat?
Share grade, quantity and delivery city with Drashti Chemicals, Vadodara. MOQ typically 50 Kilograms. You get GST invoice, COA + MSDS and a documented quote within 24 hours — WhatsApp or RFQ form.
What is the minimum order quantity for FERRIC ALUM / NON FERRIC ALUM?
Minimum order is 50 Kilograms. Larger bulk orders (500 kg+) get priority dispatch planning from Vadodara, Gujarat.
What packaging is available for FERRIC ALUM / NON FERRIC ALUM?
Standard packaging includes MOQ: 50 Kilograms and 25 kg HDPE bags / drums. Tanker, drum and custom bulk packaging available on request for industrial buyers.
Do you supply FERRIC ALUM / NON FERRIC ALUM to Mumbai, Delhi and Ahmedabad?
Yes — pan-India delivery by road and rail from Vadodara, Gujarat. We also export to UAE, Saudi Arabia, Africa and Southeast Asia with COA, MSDS and shipping documents.
What grade of FERRIC ALUM / NON FERRIC ALUM do you supply?
We supply Industrial Grade grade FERRIC ALUM / NON FERRIC ALUM with purity 98%. Certificate of Analysis (COA) and MSDS provided with every batch.
Packaging Details
- MOQ: 50 Kilograms
- 25 kg HDPE bags / drums
- 50 kg & 200 kg packaging
- Bulk tanker & ISO tank supply (on request)
Technical Information
- CAS: 10043-01-3
- Grade: Industrial Grade
- Form: Solid
- Purity: 98%
- Formula: Al2(SO4)3
- Chemical name: Aluminium Sulphate
- Density 2.71 g/cm3; MW 342.15; pH 2.8-3.5; Standard IS 260:2011; HS Code 28332220
Technical Documents — Batch COA & MSDS
Procurement managers can request batch Certificate of Analysis (COA) and Safety Data Sheet (MSDS). Share your business email / WhatsApp — we send documents within 4 business hours.
WhatsApp or email quote with COA within 4 business hours