HYDROGEN PEROXIDE Supplier in Gujarat, India

Hydrogen peroxide (H₂O₂, 35% and 50% w/w) from Drashti Chemicals supports textile bleaching, paper pulp brightening, ETP advanced oxidation, and chemical synthesis across Gujarat. Unlike chlorine-based oxidants, peroxide decomposes to water and oxygen — no chlorinated byproducts in effluent. COA confirms assay and stabiliser content; degraded peroxide with low assay wastes money and extends bleaching cycle time.

35% grade suits most textile kiers and ETP AOP (Fenton-adjacent) applications; 50% grade reduces transport cost for large consumers with dedicated storage. Electronic and pharma users may require low-stabiliser grade — specify on PO. Peroxide is thermally unstable — storage temperature below 30 °C is mandatory. Never store in iron or copper contact; titanium or HDPE only.

Textile bleaching: 2–6 g/L H₂O₂ (100% basis) with caustic soda and stabiliser at 80–95 °C for 60–90 minutes. ETP colour oxidation: 100–500 mg/L with UV or ferrous catalyst depending on effluent matrix. Dose pumps in PTFE or PVDF — peroxide attacks Viton above 30%. Drashti MSDS covers spill neutralisation with dilution and ventilation.

Packaging: 35 kg and 50 kg HDPE carboys, 250 kg drums, bulk tanker for 10 MT+ monthly. MOQ one carboy; bulk quote on request. COA and MSDS per lot. GST 24AGLPC6288M1ZX. Drashti Vadodara ships with hazmat-compliant carrier across Gujarat chemical zones.

Peroxide vs. sodium hypochlorite for bleaching: peroxide suits heat-stable cellulosics and avoids AOX in effluent; hypochlorite is cheaper for cotton at ambient temperature. Peroxide vs. potassium permanganate: permanganate adds manganese sludge; peroxide is cleaner but needs higher temperature or catalyst. For ETP colour, peroxide alone is weak on reactive dyes — pair with UV or iron catalyst.