Skip to main content
Acids & Solvents

Hydrochloric Acid Grades, Packing and COA: A Buyer’s Guide for Gujarat Plants

How to RFQ hydrochloric acid 30–33% — commercial vs reagent expectations, HDPE drum vs tanker, COA fields and storage for pickling, ETP and CIP.

9 min read · 2026-10-08

By Rajesh Chauhan, Proprietor, Drashti Chemicals

Supplying industrial chemicals from Vadodara since 2015 — ETP coagulants, RO programs, and process chemicals with batch COA/MSDS.

Industrial hydrochloric acid in India is usually quoted as 30–33% HCl (muriatic / aqueous HCl, CAS 7647-01-0). The buying mistake we see most is comparing two quotes without matching assay %, iron on COA, drum integrity and whether the lot is truly commercial-grade pickling acid vs a lab reagent price that will not pass your store audit.

Buy from Drashti Chemicals

Buy Acids & Solvents Chemicals — Bulk Quote Vadodara

Documented grades from our Vadodara warehouse — batch COA & MSDS, GST invoice. Share quantity on WhatsApp for a quote (we do not publish list prices).

Need batch paperwork?

Request COA and MSDS for the grade you are evaluating — reply on WhatsApp in one tap.

Request COA / MSDS via WhatsApp

Expert supply · Est. 2015

Mr Rajesh Chauhan

Founder-led industrial chemical supply from Vadodara — ETP coagulant selection, RO programs, textile and pharma utility chemicals. Batch COA/MSDS on every dispatch. GSTIN 24AGLPC6288M1ZX.

Drashti Chemicals supplies technical/commercial HCl from Vadsar in HDPE drums and bulk road tankers as available — with batch COA and MSDS. We are a distributor; your PO should state the process (pickling, ETP pH, boiler descaling assist, pharma utility) so we do not swap grades silently.

Commercial 30–33% vs tighter purity expectations

Most Gujarat metal finishing and ETP buyers run commercial 30–33% with iron and free-chlorine limits per their incoming spec. Reagent-grade bottles are the wrong economics for a pickling tank.

If you are near food, pharma utility or export packaging, call out max iron, heavy metals and any customer audit clause on the RFQ. We quote the grade that matches — not “best available” without a spec.

Packing: HDPE drums, carboys and tankers

Standard inward packing is 35 kg / 50 kg HDPE drums with sealed bungs. Check bung torque and drum age on receipt — HCl fumes attack poor seals and corrode nearby inventory in a shared store.

Tanker loads suit continuous pickling or large ETP acid dosing with bunded storage. Share tank material (FRP/HDPE/rubber-lined) and vent routing before first tanker — HCl vapour needs respect.

COA fields that matter on incoming QC

Confirm: product name, CAS 7647-01-0, batch/lot, assay % HCl, specific gravity band, iron and any heavy-metal lines your QA sheet lists. Match batch on COA to drum embossing or label.

See our chemical COA interpretation guide for a cross-acid checklist. Reject mismatched CAS or assay before unloading — relabelled drum stock still happens in the market.

Storage, fumes and PPE

Store upright, cool, ventilated, away from metals and oxidisers. Secondary containment is non-negotiable for drum bays. Operators need acid-resistant gloves, face shield and eyewash access — HCl fumes track low along floor drains.

Never mix with hypochlorite or unknown cleaners in the same drain without a written procedure — chlorine gas risk is real on plant floors.

Typical duties we quote from Vadodara

Carbon-steel pickling and scale removal, ETP pH reduction before coagulation, RO/CIP acid steps where your membrane vendor allows HCl, and boiler offline cleaning when the programme calls for mineral acid.

For gentler solid descaling with lower fume, compare sulphamic acid on the same RFQ — different economics, sometimes better for enclosed heat exchangers.

RFQ checklist (copy to procurement)

State: assay target (e.g. 32% min), monthly kg or drum count, delivery GIDC, pickling vs ETP vs other, max iron if known, and whether you need recurring tanker schedule.

WhatsApp or use the product page RFQ — response target is four business hours for standing Gujarat accounts. GST invoicing under Drashti GSTIN 24AGLPC6288M1ZX with HSN on the invoice.

Related chemicals from Drashti Chemicals

Request bulk quote →

Frequently Asked Questions

What concentration is hydrochloric acid sold in bulk in India?

Commercial pickling and process supply is typically 30–33% HCl. Confirm the assay band on COA — do not assume 35% unless your spec says so.

Do you supply HCl in tankers?

Yes, where logistics and storage at your site allow. RFQ with monthly volume, tank material and first delivery window.

How is HCl different from sulphuric for pickling?

HCl pickling is faster on many steel scales but adds chloride to effluent; sulphuric adds sulfate load and different fume profile. Metallurgy and consent drive the choice — we stock both for side-by-side trials.

Does every drum include COA?

Yes — batch COA and MSDS with supply. Request a sample COA on the RFQ if you are qualifying Drashti as a new vendor.

Need Acids & Solvents Chemicals?

Get a bulk quote from Drashti Chemicals — Vadodara

Our team helps with product selection, grade matching, dosing guidance and pan-India delivery. Export orders (UAE, Bangladesh, Egypt, Africa) handled with full documentation.

Quote with COA within 4 business hours · GST invoice provided